Cantilever type CNC drilling machine
Drill the most accurate holes within the shortest possible time.
While keeping the superior machining ability the same as our high-end models, improved operability and much higher efficiency for this drilling machine has been achieved thanks to its individual design and ultra compact structure.
- mot 25
Moving-gantry CNC acoustic panel drilling center
Thousands of holes can be drilled in minutes thanks to the powerful 55-spindle drilling head at high positioning speed.
- MEC 1040
Through-feed CNC drilling machine
People want to get all the work done in a machine which can easily perform top drilling, side drilling, grooving even routing and only small footprint is required.
WOODWISE CNC through-feed drilling machine BM 110 is just such a machine. Even if one who knows nothing about CNC programming can operate it without any problems.
BM 110 is equipped with WOODWISE’s self-developed 3-HP multi-spindle drilling head 10V6HS as standard and 18000 or 24000 rpm electro spindle as optional to perform automatic through-feed panel processing that is exquisitely simple as well as energy-saving, and the required footprint for its installation is smaller than 2.4m2
- BM 110
- BM 110 plus
Cantilever type CNC drilling machinemot 25
X / Y / Z = 2440 / 1220 / 60 mm
Multi-spindle drilling head 7V
7V2H(optional)
5V4H(optional)
Moving-gantry CNC acoustic panel drilling centerMEC 1040 Working travel X / Y / Z = 3050 / 1220 / 60 mm
55-spindle drilling head
Multi-spindle drilling machineBM 110
Multi-spindle drilling head 10V6HS
Min. workable length of workpiece = 250 mm
Workable width of workpiece = 70 ~ 920 mm
Workable thickness of workpiece = 10 ~ 50 mm
Max. workable width of workpiece for saw = 1030 mm
Multi-spindle drilling machineBM 110 plus
Multi-spindle drilling head 10V6HS
Max. rotation speed of electrospindle: 18000 / 24000 rpm
Min. workable length of workpiece = 250 mm
Workable width of workpiece = 70 ~ 920 mm
Workable thickness of workpiece = 10 ~ 50 mm
Max. workable width of workpiece for saw = 1030 mm
Safe and easy to use. All processing can be completed automatically just after pushing a workpiece against the starting-point stop.
Roller hold-down device functions automatically according to the workpiece height.
The actual length of workpiece will be measured by the machine's measuring device before its processing to avoid defective.
The tool library makes it easy to get started with the embeded CAD / CAM
With the conversational programming, operators can easily generate part programs at the machine in mere minutes.
Machining simulation for eliminating errors appearing during processing
Wood / Aluminum / Composite Working
Stone Working
